2pcs 14FT High Quality Universal 33C Marine Throttle Control Cable Boat Outboard Lever

Description:

Premium Grade cable. 33C Supreme Blue Jacket Cables use a unique splined core wire. Its ridges allow a close fit with the cables inner liner, but with minimum contact so the core glides back and forth. suitable for single and dual stations. Minimum bend radius 100mm. Universal for most outboard, outdrive and inboard units. Stainless steel end fitting. Nominal 75mm travel. Long Engine Control Cables are available to order.

Features:

• High quality, long lasting flexible cables the 33C type are for inboard outboards, inboards and outboards. They are ideal for high performance application and long cable runs and complex routings.
• The innovative core design maximises the efficiency and minimises lost motion, while the exclusive design of the conduit provides extremely high level of flexibility.
• Suitable for outboard- inboard and stern drive engines
• High efficiency for smooth operation
• High flexibility for reduced bend radius
• Ideal for long complex cable routings
• Maintenance free
• Stainless steel cable ends and fittings
• High resistance blue outer jacket against abrasion, UV & chemicals
• Suitable for all Yamaha and Parsun outboard motors. Also compatible with 33C Morse and Teleflex brands.

Specifications:

• Out-diameter:8.5mm
• In-diameter:3.1mm
• Thread size:10-32UNF or M5
• Stroke:76mm-96mm
• Minimum bend radius: 100mm

Package included:

• 2x 14FT Throttle Shift Control Cables

Installation Instructions:

1. Please measure the cable routing path from the control head to the engine connection.

2. When choosing the correct cable length for your application, be sure to add the distance from the centre of the engine to the bilge area through the rigging tube, from that point to the gunnel (usually starboard) where the cables will run to the console, the length of the gunnel or rigging tube, and the distance from the gunnel to the console where the remote control box will be located - then add two feet.

3. This extra distance will allow for any errors in measurement and ensure sufficient bend radius for smooth, easy shifting.

4. Most cables are measured on the foot. So round up to the next foot when you make your option.